![ProjectFlightDesign](/img/default-banner.jpg)
- Видео 55
- Просмотров 913 476
ProjectFlightDesign
Добавлен 4 мар 2013
A channel dedicated to my pursuit of RC plane designs, experiments, and flights (my previous channel was "schraut5")
sites.google.com/site/projectflightd/
sites.google.com/site/projectflightd/
1,000 SUBS GIVEAWAY!
Thanks for all of the subscriptions and following me over to my new channel! THIS IS THE VIDEO DRAWING!
In this drawing I will be giving away a Funjet Clone, which is my design based on the Multiplex plane, which will include 2 servos and a Grayson Microjet V3 2200kv motor.
The winner has 2 weeks to contact me to claim the prize!
In this drawing I will be giving away a Funjet Clone, which is my design based on the Multiplex plane, which will include 2 servos and a Grayson Microjet V3 2200kv motor.
The winner has 2 weeks to contact me to claim the prize!
Просмотров: 4 808
Видео
Quad Test Flight!
Просмотров 1,8 тыс.11 лет назад
I am building my first quadcopter and this my first test flight of the quad! I am really happy with this first flight - it should only get better from here. This project has been sponsored by HeadUp RC (I approached them about this project as this is a company that I have had good experiences with! They get my highest recommendation). Frame: Tarot 450mm Motors: PowerUp Slofly 400 930 kV 50 gram...
QUADCOPTER Intro
Просмотров 2,6 тыс.11 лет назад
I am building my first quadcopter and this is a just a quick unboxing of the components that I wil be using! This project has been sponsored by HeadUp RC (I approached them about this project as this is a company that I have had good experiences with! They get my highest recommendation). Frame: Tarot 450mm Motors: PowerUp Slofly 400 930 kV 50 gram www.headsuphobby.com/Power-Up-400-Slofly-Outrun...
808 #16 V2 Lens D vs GoPro
Просмотров 29 тыс.11 лет назад
Quick comparison between my GoPro and the 808 #16 V2 HD Keychain Camera with Lens D, which records 720p at 30fps. Overall, not bad for such a cheap, lightweight camera. Very good potential for filming onboard lightweight RC models. I got this camera from Ebay, from seller: digitaleleonline-caipeng
Blue Angels - Chicago Air and Water Show
Просмотров 2 тыс.11 лет назад
Footage from the Blue Angels performance at the Chicago Air and Water Show in 2012. This is a mix from their Saturday and Sunday flights. They are flying the F-18 Hornet.
Blue Wonder VS Turnigy 2730
Просмотров 51 тыс.11 лет назад
Comparison of the famous Hextronik Blue Wonder 1300 kV and the Turnigy 2730 1300 kV brushless motors - which are both 24 gram motors with very similar construction. I want to know which one creates more thrust and which is the most efficient. Hextronik Blue Wonder 1300 kV: www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=2069&aff=238467 Turnigy 2730 1300 kV: www.hobbyking.com/hobbyki...
DX7s / DX8 DragonLink Setup
Просмотров 16 тыс.11 лет назад
Information intended for those of us with a DX7s transmitter attempting to use a UHF system, like DragonLink. The DX7s transmitter does have a PPM out port, the trainer port, and most UHF systems require a PPM signal, making it a perfect transmitter for most UHF systems. sites.google.com/site/projectflightd/ I believe that you also need a PPM signal for EzUHF, Thomas Scherrer, ChainLink, Rmilec...
OrangeRx RX3S V2 Stabilizer - Video Stabilization
Просмотров 13 тыс.11 лет назад
Experiment with the FPV40 with an onboard GoPro - with and without stabilization via the OrangeRx RX3S V2 Stabilization Unit. Link to stabilizer: www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=28456&aff=238467 Info about the plane, my FPV40 design: sites.google.com/site/projectflightd/ It has a 40 inch wingspan, 13 inch root chord, 8 inch tip chord (including 2 inches of elevon), a...
DX7se DragonLink
Просмотров 1,2 тыс.11 лет назад
sites.google.com/site/projectflightd/ Information intended for those of us with a DX7se transmitter attempting to use a UHF system, like DragonLink. The DX7se transmitter does not have a PPM out port or wire to tap, only DSM2, and most UHF systems require a PPM signal, making it impossible to use a DX7se with most UHF systems. I believe that you also need a PPM signal for EzUHF, Thomas Scherrer...
Mini Skywalker
Просмотров 13 тыс.11 лет назад
Here is my mini Skywalker scratch design. It has a 50 inch x 8 inch wing with a KFm2 airfoil, with the step made from 1/2 inch pink foamboard from Home Depot. sites.google.com/site/projectflightd/ Wing: 50" x 8" Fuselage Length: 50", 10.5" in front of wing, 12" boom behind wing before the tail starts Motor: 2212-13, 1100kV and 50 grams Prop: 10x4.7 APC ESC: 18A Exceed RC Battery: 2500 mAh, 11.1...
1000 SUBSCRIBER FUNJET CLONE GIVEAWAY
Просмотров 2,3 тыс.11 лет назад
To be entered you must subscribe and comment below! sites.google.com/site/projectflightd/ In thins drawing I will be giving away a Funjet Clone, which is my design based on the Multiplex plane, which will include 2 servos and a Grayson Microjet V3 2200kv motor. I will hold the drawing once I reach 1,000 subscribers!
Funjet Clone Build Video - Part 2
Просмотров 24 тыс.11 лет назад
PDF's: sites.google.com/site/projectflightd/funjet Flight Video: ruclips.net/video/FHayRn3cJd8/видео.html This is my Multiplex Funjet Ultra clone. It has a KFm4 airfoil and a 30 inch wingspan. The white foam is dollar tree foamboard and the pink foam is 1/2 inch wall insulation foamboard from Home Depot. Wingspan: 30 inch Fuselage Length: 24.5 inches Fuselage Width: 2.5 inches (widens to 3 inch...
Funjet Clone Build Video - Part 1
Просмотров 21 тыс.11 лет назад
PDF's: sites.google.com/site/projectflightd/funjet Flight Video: ruclips.net/video/FHayRn3cJd8/видео.html This is my Multiplex Funjet Ultra clone. It has a KFm4 airfoil and a 30 inch wingspan. The white foam is dollar tree foamboard and the pink foam is 1/2 inch wall insulation foamboard from Home Depot. Wingspan: 30 inch Fuselage Length: 24.5 inches Fuselage Width: 2.5 inches (widens to 3 inch...
Multiplex Funjet Clone!
Просмотров 26 тыс.11 лет назад
PDF's: sites.google.com/site/projectflightd/funjet BUILD VIDEO: ruclips.net/video/PlsdWah1wIs/видео.html This is my Multiplex Funjet Ultra clone. It has a KFm4 airfoil and a 30 inch wingspan. The white foam is dollar tree foamboard and the pink foam is 1/2 inch wall insulation foamboard from Home Depot. Wingspan: 30 inch Fuselage Length: 24.5 inches Fuselage Width: 2.5 inches (widens to 3 inche...
OrangeRx RX3S V2 Stabilizer - Test Flight
Просмотров 29 тыс.11 лет назад
This is the HobbyKing OrangeRx V2 Stabilization unit on my Pusher Delta. This delta wing is a great park flyer but definitely gets pushed around by the wind. This stabilization unit works great for windy conditions! Link to stabilizer: www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=28456&aff=238467 sites.google.com/site/projectflightd/ Please see my other videos for information abo...
OrangeRx RX3S V2 Stabilizer - Delta Setup
Просмотров 29 тыс.11 лет назад
OrangeRx RX3S V2 Stabilizer - Delta Setup
Cheap RC Pushrods - DIY Instructions
Просмотров 59 тыс.11 лет назад
Cheap RC Pushrods - DIY Instructions
Delta Pusher Wing - Design and Maiden
Просмотров 16 тыс.11 лет назад
Delta Pusher Wing - Design and Maiden
Scrap Delta Wing - Design and Maiden
Просмотров 3 тыс.11 лет назад
Scrap Delta Wing - Design and Maiden
???
Did he cover COG? I plugged the calcs into the wing calculator and got about 7.5 in from the leading edge. Not sure that is right. My nose dives into the ground when I left of the elevator, I'm thinking I need some reflex to get it flying level
Hi there brad watching from New Zealand love this plane so simple and flies really nicely. Looking at making one and doubling the size of the build my issue is to figure out the foam you have used it’s not readily available here in New Zealand I can find a white foam that is similar but I have no idea where to source the pink foam can you give us any more info on this foam to help me to find something equivalent Cheers
Is there any calculating of impedance for this build or is it generally good for hobby quality?
Buenas puedes enviar los planos gracias
That looks like it's a mini version of the trainers in the 50's, like the DeBolt Cruizer
How do you make a stick motor mount? Video please.
Awesome! Thanks for sharing.
Very clever, crafty builder. Great video.
GREAT video Brother. I ALWAYS over design my builds. Going to try this one for simplicity reasons. One more thing. I'm always very anal about by motor mounts. Over designed. Do you have a video on your motor mount design. THANKS.
Got to love the simplicity of the wings. GREAT video.
What cutter do you use? It cuts like butter! I need to cut this type of material, could you help me please?
Hi, will installing the DL remove the Model Match technology in the spektrum radio??
may i know how much should the delta wing should weigh with all the elctronics? can u please note me?
Do you still fly in Chicago ??!
Plans please??
I just want to thank you for all that you have done over the years to make people aware of the advantages of the KF airfoils. Your contribution will never, ever be forgotten. ~ Dick Kline
Thank you just building one of these FPV in 2022.
Why range this camera ???????
The pulling out of the loop "a little funny" was probably due to the fact that, without tip fins, your plane was essentially operating as a true Flying Wing. The old Northrop XB-35s and YB-49s had a tendency to "hunt" about the yaw axis after turns, especially in turbulent conditions. Your plane was probably experiencing the same effect. Otherwise, it looked like it was flying beautifully!
Uh, your antenna length should of been 50.5mm or 5.05cm in length. Either you typed in the wrong number or the calculator is wrong. You find out the size by dividing 300/5.945= 50.5mm 300 is the speed of light. Also, it’s hard to make transmitting antennas because you need to know the SWR of that antenna. Usually antennas are slightly shorter than their theoretical size because the type of metal will effect how electrically long the antenna is.
Thanks for the video. I'm building the plane now. My specialty is building an airplane with vector control. Had already tried it, but to no avail. The engine was too close to the wing. Hope it works better on this plane. If you have interested on my construction, please enjoy my video. ruclips.net/video/W_ZP5CByItU/видео.html br. Hubertus
this is great
Great video. Please where is the cg in inches from the nose. Thank you.
Hello, the plane of the wing does not come out, the link is broken, you could put it back, I would be interested in being able to do it. Thank you.
whats good in 2021 now? this video is 8 years old
Great build vid. That is my next plane
how much weight you cn put on that ?
Watching a video about how to bend wires with the bending off camera. Kind of like doing it on radio.
LoL 😂
Is there a way I could get plans for this? I've looked at the links provided but couldn't find anything.
It's welding wire not soldering wire.
Looking to build soon...can you fix the link to plans. Thanks for sharing this info!
how to make a diy clover leaf antenna 2.4g, pls?
I love it! I'm waiting for mine. I need something that can slow down. I have a Flying Foam, Joker 36 (company no longer exists) but it comes in for landing like a meteorite and there's no flying it if I've had my coffee.
You don't want to use a 1.2ghz system with 2.4 because of harmonics. Unless you have filters installed
Thank you for the vidéo 👍👍👍
Nice plane. You mentioned that it is heavy ...any reason why you have not tried KFM3 that i have read has more lift?
Nice tutorial, have you ever try to have a KFM3 and compar it to you KFM2? I have read that it has more lift power.
Very useful video for those who want to learn about this kfm airfoil ( me inclided). Why the lenght of the chore includes the ailerons...they are moving. Have you tried the wing with out the ailerons? thanks for sharing!
how to locate the center of gravity?
What happened to the pdf plans? They are not at the website listed.
Red wonder is more eficient. More if it i rewond with real magnetic wire. www.rcgroups.com/forums/showthread.php?1025188-Turnigy-2730-Blue-n-red-Wonder-Rewinds&highlight=blue+wonder
Check here: ruclips.net/video/E0dBCeOPw4c/видео.html for comparison of both methods. This method IS NOT safe at all.
Sir I live in India so that's why I don't have that much availability of Electronics so I can only use 2212 (1400kv,2200kv) bldc motor prop and battery are not my issues but i want a small wing 30" i want the same stability and power(i want stable plane cause i dont have big area to fly around) suggest me which motor?
Did you use the same antennas on all tested systems? It that case your test is faulty
900MHz is only to be used in low populated areas as a lot of remote things such as gate keys or car keys work on this range, hence why being in the city whilst testing this is the worst scenario for that band. Great band though for long range fpv in remote locations though
Does anybody know what happened?
Where is the CG on this plane? I built one but its flying funny think the CG is off. Thanks
TestFlite has come along way since then
Most big Best Buys,home Depots recycle batteries, just drop them off